NewsFlexible robot systems for digitalized production

Flexible robot systems for digitalized production

The EU initiative SMErobotics presents cost-effective automation solutions for assembly, welding and woodworking.

Flexible robot systems for digitalized production

Cost-effective automation solutions for assembly, welding and woodworking, specially tailored to the needs of small and medium-sized manufacturers: that is what will be on show from the European SMErobotics initiative at the AUTOMATICA trade fair from 21 to 24 June in Munich. Coordinated by Fraunhofer IPA, the EU project will present technology modules for system integrators and suppliers of innovative robot systems as well as ready-to-use applications for SMEs.

To date, high variant diversity and quality requirements as well as small lot sizes have stood in the way of the cost-effective use of “classic” robot systems in small and medium-sized enterprises (SMEs). With their complex set-up, high space requirements (with separation from humans) and inflexible programming, robot systems have so far been incompatible with the customer-focused production methods of SMEs.

To allow a higher degree of automation at SMEs, the SMErobotics initiative has developed intelligent robot systems specially tailored to the needs of such companies. These systems, which require no separating guards, can work with and alongside their human colleagues. New technologies for intuitive programming and robust sensor-monitored program execution enable SMEs to make efficient use of robot systems, also when there are many different product variants, while further improving the throughput and quality of their products.

Software: the key component

One of the goals of SMErobotics is to allow the worker to easily instruct the robot and to control it in a reliable and time-saving manner. This is made possible by the programming of assembly and handling tasks using intuitive graphical control panels. The worker instructs the robot in easy-to-follow steps using a skill-based graphical programming system, i.e. one based on ready-to-use program modules.

In another graphical programming system for complex assembly tasks, such as the assembling of gearboxes, the user interactively specifies the assembly steps on the CAD model, independently of an actual robot system. Powerful planning/reasoning systems then automatically compute the necessary robot motions based on models of the individual components and the executing robot system. In tests, this enabled workers with no robotics experience to program assembly tasks between 10 and 15 times faster than experienced robot programmers with a handheld teach pendant.

Robust, skill-based program execution also allows a transparent approach to inaccuracies in environment and on workpieces. This is vital for SMEs, because, for example, robot systems often need to work on manually prepared workpieces with tolerances or deviations from the design data. In addition, the use of sensors for workpiece localization and measurement extensively dispenses with the need for fixed workpiece positioning devices.

The described software modules for intuitive programming and program generation were developed independently of specific models of robot. They are available as standalone modules and can be used by automation and industrial IT suppliers in their system solutions.

Applications for welding processes and flexible assembly

Having already been tested in initial real-world trials, several robot cells and workstations for human-robot collaboration demonstrate the practical benefits of the software components in typical SME production scenarios.

Developed by Fraunhofer IPA, “CoWeldRob” is a welding cell for “lot size 1”. Robust 3D sensors, extensive technology/process models and an intuitive graphical user interface allow preassembled components to be seam-welded in just a few simple steps. The system scans new workpieces, identifies the required weld seams and gives the welder appropriate parameter suggestions for the welding process. In addition, having identified and localized known workpieces, the system then generates the welding program fully automatically. The welder can either make changes to the program on the user interface or have it executed immediately. Any desired changes are learned by the system and taken into account in subsequent tasks.

Several applications are realized with a two-arm robot that acts similarly to a human worker. Thus, there is no need for clamping or positioning, which makes for an especially cost-effective solution. SMErobotics uses the two-arm robot to demonstrate the welding of large components, such as for the construction sector. The robot can move the components with both arms and hold them with one arm while welding with the other arm. Two-armed assembly is demonstrated using the example of gearbox components as well as components from the aerospace industry. Sensor-monitored skills allow the robust execution of insertion and screwing operations, while powerful 3D sensors enable components to be located and picked up from positions inside the workspace that are only approximately known.

That assembly processes with tolerances in the micrometre range are also possible is demonstrated by the precision assembly of an entire component group without the need for complex, product-specific fixtures. The cell, which is currently being trialled by an end user and is planned for future use in regular production, is capable of assembling e.g. valve modules in several consecutive steps. This also includes the insertion of a spool with a tolerance of just three micrometres. Precise object recognition and localization allow secure gripping of loose components from bins as well as accurate navigation to the assembly site, while sensitive sensors and selectively compliant motions make for clamping-free assembly. Tests reveal a 30% lower error rate in assembly of the spool than with current manual execution.

Tool for quickly checking the cost of investing in a robot system

The stand at the fair will also feature five other demonstrators of technology components and collaborative workstations as well as the online tool www.robotinvestment.eu. This tool enables end users to quickly calculate the cost of a robot system as well as their return on investment. In addition, system integrators can also be directly contacted if there is interest. The tool provides companies with an overview of the options and opportunities for an automation solution as well as an initial decision-making basis.

Further information about SMErobotics: www.smerobotics.org 

European wide project partner

In this research initiative leading European robot manufacturer, system integrators, leading research institutes and end-user from all over Europe are represented. Among the partners of the initiative are robot manufacturers Comau, Güdel, KUKA and Reis (now KUKA Industries) as well as the universities and research institutions Lund University, DTI Danish Technological Institute, fortiss GmbH as An-Institute Technical University Munich (TUM) and the Robotics and Mechatronics Center of the German Aerospace Center (DLR). SMErobotics is being supported by industrial end-users and system integrators since 2014 that give specific feedback and can first benefit of these new technologies. With this network SMErobotics has a far-ranging technological know-how and consistently involves end-users in order to deliver challenging solutions and innovations in robot technology.

SMErobotics is coordinated by Fraunhofer IPA, one of the leading institutions for applied research. By combining SME-specific knowledge with the market background of the industrial partners and the specific focus on end-users, SMErobotics possesses well-grounded practical knowledge with regard to flexible automation requirements. Building upon that SMErobotics develops and tests project results in close collaboration with different SMEs in real production environments.

The project partners are interested in collaboration with further SMEs that contribute their experience and want to profit from latest technologies.

SMErobotics is a EU funded research project (grant agreement no. 287787) under the 7th EU framework programme (FP7/2007-2013).
Project title: “The European Robotics Initiative for Strengthening the Competitiveness of SMEs in Manufacturing by integrating aspects of cognitive systems”
Project run time: 01.01.2012 - 30.06.2016

Source: Fraunhofer IPA Editor Countries / organization: EU Topic: Innovation Engineering and Production

Promoter

About us